Z-Wave Plus Philio Датчик температуры и влажности
Z-Wave Philio 2 in 1 Temperature / Humidity Sensor - Gen5
- Integrated Humidity and Temperature Sensor
- Extremely low power consumption
- Higher output power to enhance the communication range
- Slim, small and elegant
- Tamper switch included
- Very easy to install
- Z-Wave Plus Certified
The flood multisensor PAT02 has temperature and humidity, 3 sensors function in one, based on Z-WaveTM technology.
Z-Wave Philio 2 in 1 Temperature / Humidity Sensor measures humidity in percentage and temperature in Celsius degrees of its environment. The sensor has included tamper switch that works as a burglar alarm. By using Z-Wave all the information is transfered to the Gateway.
The 2-in-1 Sensor can be mounted on almost any surface in horizontal or vertical position. The sensor has a casing with a barred aperture for the measurement of the humidity. On the backside of the case there is the tamper switch that works as burglar alarm if the device is moved or manipulated.
With the Philio sensors you can easily make your home smarter and safer. The sensors are sleek, small and inconspicuously and fit on any surface. If you want to protect your home from burglars or other hazards like fire or water you can easily integrate the Philio Sensors to your Z-Wave Smart Home system.
Чем больше диапазон действия, тем более надежным является продукт - устройство имеет первоклассную антенну. Оптимизированное для надежности, это устройство может взаимодействовать беспроводным способом на расстояния более 150 метров.
Лучше антенна. Лучше Z-Wave. Устройство разработано на технологии Z-Wave Plus последнего 5го поколения, чтобы предоставить вам самое быстрое время отклика и оптимальное время жизни батареи между перезарядками.
Если вы используете устройство для обеспечения безопасности, вы хотите чтобы взаимодействие было защищенным. Вот почему устройство использует беспроводное шифрование AES-128 для защиты от несанкционированного доступа и хакеров.
Используете ли вы устройство для комфорта или безопасности, вы желаете чтобы оно всегда оставалось обновленным до последней версии. Как бы не создавались обновления прошивки для устройства, вы всегда можете обновить его с помощью Microsoft Windows или выбрать Z-Wave контроллер.
Technical Specification
- MODEL NUMBER
- PAT02-1B
- HARDWARE
- Z-Wave Chip 500 series
- COMMUNICATION PROTOCOLS
- Z-Wave Plus
- FEATURES
- LED AND BUTTONS
- Push-button: Wake-up, inclusion and exclusion
- LED indication
- Z-WAVE GROUPS
- One group and eight device (nodes)
- SENSOR
- Humidity
- Temperature: -10 - +40°C (±0.5°C within 0°C C-40°C range)
- DIMENSIONS
- Packing size: (LxWxH)
- Base size: (LxWxH)
- CERTIFICATIONS
- CE, Z-Wave
- POWER SUPPLY
- CR123A battery, 3.0V DC
- POWER CONSUMPTION
- up to 1W
- RADIO SIGNAL POWER
- up to 1mW
- RANGE
- up to 150m (outdoors) and 100m (indoors)
- OPERATIONAL TEMPERATURE RANGE
- -10-40°C
- OPERATIONAL HUMIDITY:
- 80%
- IP CODE
- IP20
Package content
- Unit:
- Sensor Unit
- Double-Sided Tape
- Screws
- User manual
Additional Info
Z-Wave Association Capabilities
Model: Temperature and Humidity sensor (PAT02-1B)
Z-Wave Certification Number: ZC10-15060010
Group ID |
Maximum Nodes |
Description |
1 | 8 | The group 1 is for receiving the report message, like triggered event, temperature, humidity etc. And each group support 8 nodes maximum. |
Z-Wave Configuration Capabilities
Model: Temperature and Humidity sensor (PAT02-1B)
Z-Wave Certification Number: ZC10-15060010
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
10 | 1 | Auto Report Battery Time | 0 to 127 (Default) |
The interval time for auto report the battery level. | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
13 | 1 | Auto Report Temperature Time | 0 to 127 (Default) |
The interval time for auto report the temperature. | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
14 | 1 | Auto Report Humidity Time | 0 to 127 (Default) |
The interval time for auto report the humidity. | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
20 | 1 | Auto Report Tick Interval | 0 to 255 (Default) |
The interval time for auto report each tick. | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
21 | 1 | Temperature Differential Report | 0 to 127 (Default) |
The temperature differential to report. 0 means turn off this function. | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
23 | 1 | Humidity Differential Report | 0 to 60 (Default) |
The humidity differential to report. | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
5 | 1 | Operation Mode | 8 | Setting the temperature scale. 0: Fahrenheit, 1:Celsius | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
7 | 1 | Customer Function | 32 | Disable Multi CC in auto report. (1:Disable, 0:Enable) | |
16 | Notification Type, 0: Using Notification Report. 1: Using Sensor Binary Report. |
Z-Wave Command Classes
Model: Temperature and Humidity sensor (PAT02-1B)
Z-Wave Certification Number: ZC10-15060010
Supported Command Classes |
Association |
Association Group Information |
Battery |
Binary Sensor |
Configuration |
Device Reset Local |
Firmware Update Meta Data |
Manufacturer Specific |
Multi-Command |
Multilevel Sensor |
Notification |
Powerlevel |
Security |
Version |
Wake Up |
ZWavePlus Info |
Controlled Command Classes |
Wake Up |
Технология | Z-Wave+ |
---|---|
Z-Wave Plus: | Нет |
Z-Wave аппаратная платформа | SD3502 |
Z-Wave тип библиотеки | Enhanced 232 Slave |
Z-Wave тип устройства | Notification Sensor |
Z-Wave тип роли | Reporting Sleeping Slave |
Группы ассоциаций | 1 |
Производитель | Philio |
Тип датчика | мультисенсор, температуры, влажности |
Z-Wave Функции | Запуск сцен, Power Level |
Внутренняя/наружная установка | Внутренняя |
Источник питания | Батарея |
Тип батареи | CR 123 |
Форм-фактор | Настенный |
Назначение | Отслеживание температуры, влажности, освещенности |
OTA обновление прошивки | Да |