Z-Wave Plus Philio 3 в 1 Мультисенсор A
Z-Wave Philio Multisensor - Flood / Temp / Humidity
- Integrated Flood Sensor, Humidity Sensor and Temperature Sensor
- Extremely low power consumption
- Higher output power to enhance the communication range
- Slim, small and elegant
- Very easy to install
- Z-Wave Plus Certified
Помимо этого, датчик протечки можно использовать для мониторинга уровня воды в заполненных сосудах, например, бак полива. При понижении уровня воды, датчик сообщит об этом центральному контроллеру.
The flood multisensor PAT02 has flood, temperature and humidity, 3 sensors function in one, based on Z-WaveTM technology.
Z-Wave Philio Multisensor can be used as a security device or home automation device. When the detector is operated with security appliances, the detector acts as a security device by detecting flood, e.g. next to a leaking washing machine. Additionally high temperature and humidity detection can be defined as trigger for alarm signals. Besides the water sensor can be used monitoring water level in filled vessels, e.g. a tank, to inform in case of low water.
Чем больше диапазон действия, тем более надежным является продукт - устройство имеет первоклассную антенну. Оптимизированное для надежности, это устройство может взаимодействовать беспроводным способом на расстояния более 150 метров.
Лучше антенна. Лучше Z-Wave. Устройство разработано на технологии Z-Wave Plus последнего 5го поколения, чтобы предоставить вам самое быстрое время отклика и оптимальное время жизни батареи между перезарядками.
Если вы используете устройство для обеспечения безопасности, вы хотите чтобы взаимодействие было защищенным. Вот почему устройство использует беспроводное шифрование AES-128 для защиты от несанкционированного доступа и хакеров.
Используете ли вы устройство для комфорта или безопасности, вы желаете чтобы оно всегда оставалось обновленным до последней версии. Как бы не создавались обновления прошивки для устройства, вы всегда можете обновить его с помощью Microsoft Windows или выбрать Z-Wave контроллер.
Technical Specification
- MODEL NUMBER
- PAT02-A
- HARDWARE
- Z-Wave Chip 500 series
- COMMUNICATION PROTOCOLS
- Z-Wave Plus
- FEATURES
- LED AND BUTTONS
- Push-button: Wake-up, inclusion and exclusion
- LED indication
- Z-WAVE GROUPS
- One group and one device (nodes)
- SENSOR
- Water
- Humidity
- Temperature: -10 - +40°C (±0.5°C within 0°C C-40°C range)
- DIMENSIONS
- Packing size: (LxWxH)
- Base size: (LxWxH)
- CERTIFICATIONS
- CE, Z-Wave
- POWER SUPPLY
- CR123A battery, 3.0V DC
- POWER CONSUMPTION
- up to 1W
- RADIO SIGNAL POWER
- up to 1mW
- RANGE
- up to 150m (outdoors) and 100m (indoors)
- OPERATIONAL TEMPERATURE RANGE
- -10-40°C
- OPERATIONAL HUMIDITY:
- 80%
- IP CODE
- IP20
Package content
- Unit:
- Sensor Unit
- Double-Sided Tape
- Screws
- User manual
Additional Info
Z-Wave Association Capabilities
Model: Flood Multisensor (PAT02-1A)
Z-Wave Certification Number: ZC10-16030004
Group ID |
Maximum Nodes |
Description |
1 | 8 | Group 1 is the Lifeline group. The group 1 is for receiving the report message, like triggered event, temperature, humidity etc. |
2 | 8 | The group 2 is for the light control, the device will send the “Basic Set” command to this group. And each group support 8 nodes maximum. |
Z-Wave Configuration Capabilities
Model: Flood Multisensor (PAT02-1A)
Z-Wave Certification Number: ZC10-16030004
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
1 | 1 | Basic Set OFF Level | 0 (Default) |
Setting the BASIC command value 0x00. | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
10 | 1 | Auto Report Battery Time | 0 to 127 (Default) |
The interval time for auto report the battery level. | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
13 | 1 | Auto Report Temperature Time | 0 to 127 (Default) |
The interval time for auto report the temperature. | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
14 | 1 | Auto Report Humidity Time | 0 to 127 (Default) |
The interval time for auto report the humidity. | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
15 | 1 | Auto Report Flood Time | 0 to 127 (Default) |
The interval time for auto report the flood state. | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
2 | 1 | Basic Set ON Level | 255 (Default) |
Setting the BASIC command value 0xFF. | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
20 | 1 | Auto Report Tick Interval | 0 to 255 (Default) |
The interval time for auto report each tick. | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
21 | 1 | Temperature Differential Report | 0 to 127 (Default) |
The temperature differential to report. 0 means turn off this function. | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
23 | 1 | Humidity Differential Report | 0 to 60 (Default) |
The humidity differential to report. | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
5 | 1 | Operation Mode | 1 | Disable the Flood function. | |
8 | Setting the temperature scale. 0: Fahrenheit, 1:Celsius | ||||
32 | Disable the temperature report after event triggered. (1:Disable, 0:Enable) | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
6 | 1 | Mult-Sensor Function Switch | 64 | Disable the humidity report after event triggered. (1:Disable, 0:Enable) | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
7 | 1 | Customer Function | 32 | Disable Multi CC in auto report. (1:Disable, 0:Enable) | |
64 | Disable to report battery state when the device triggered. (1:Disable, 0:Enable) | ||||
8 | Disable send out BASIC OFF after the flood event cleared. (1:Disable, 0:Enable) | ||||
16 | Notification Type, 0: Using Notification Report. 1: Using Sensor Binary Report. |
Z-Wave Command Classes
Model: Flood Multisensor (PAT02-1A)
Z-Wave Certification Number: ZC10-16030004
Supported Command Classes |
Association |
Association Group Information |
Battery |
Binary Sensor |
Configuration |
Device Reset Local |
Firmware Update MD V2 |
Manufacturer Specific |
Multi-Command |
Multilevel Sensor |
Notification |
Powerlevel |
Security |
Version |
Wake Up |
ZWavePlus Info |
Controlled Command Classes |
Basic |
Технология | Z-Wave+ |
---|---|
Z-Wave Plus: | Нет |
Z-Wave аппаратная платформа | SD3502 |
Z-Wave тип библиотеки | Enhanced 232 Slave |
Z-Wave тип устройства | Notification Sensor |
Z-Wave тип роли | Reporting Sleeping Slave |
Группы ассоциаций | 2 |
Производитель | Philio |
Тип датчика | протечки, температуры, влажности |
Z-Wave Функции | Запуск сцен, Power Level |
Внутренняя/наружная установка | Внутренняя |
Источник питания | Батарея |
Тип батареи | CR 123 |
Форм-фактор | Настенный |
Назначение | Отслеживание затопления, Отслеживание температуры, влажности, освещенности |
OTA обновление прошивки | Да |