Z-Wave Plus NodOn Micro Smart Plug
Micro Smart Plug is a smart plug that lets you wirelessly control whatever is plugged into it
- On/Off function
- Metering of instant power (W) and cumulated energy (Wh)
The NodOn® Micro Smart Plug can be controlled by a Z-Wave® or Z-Wave Plus® home automation gateway or directly through others Z-Wave® or Z-Wave Plus® devices such as The Soft Remote, The NodOn® Wall Switch or the NodOn® Octan Remote.
Based on a very innovative construction, the NodOn® Micro Smart Plug is among the smallest Smart Plug on the market and fully CE Certified. Connected to a Home Automation getaway, it shares Metering information (Power and Energy)
Technical Specification
- HARDWARE
- Z-Wave Chip 500 series
- COMMUNICATION PROTOCOLS
- Z-Wave Plus
- MAXIMUM LOAD
- AC 220V-240V: 1800W
- OVERCURRENT PROTECTION
- required external 8A circuit breaker
- DIMENSIONS
- Packing size:5x5x8 cm (LxWxH)
- Base size:4.1x7.3 cm (DxH)
- CERTIFICATIONS
- CE, Z-Wave
- POWER SUPPLY
- Input: AC 220V-240VAC, 50-60Hz
- POWER CONSUMPTION
- up to 1W
- RADIO SIGNAL POWER
- up to 1mW
- RANGE
- up to 50m (outdoors) and 40m (indoors)
- OPERATIONAL TEMPERATURE
- -10-50°C
- IP CODE
- IP20
Package content
- Unit
- User manual
Z-Wave Specification
Z-Wave Association Capabilities
Group ID |
Maximum Nodes |
Description |
1 | 5 | Z-Wave Plus® Lifeline: This group is generally used to report information of the Micro Smart Plug to the Main Controller of the networ |
2 | 5 | Follow State: When the Micro Smart Plug is switched ON (respectively OFF) using the local button, it will send ON (respectively OFF) command to the associated devices. No command is sent if the Micro Smart Plug is switched ON or OFF wirelessly. This group is configurable through the parameter 3. |
3 | 5 | Follow Complementary State: When the Micro Smart Plug is switched ON (respectively OFF) using the local button, it will send OFF (respectively ON) command to the associated devices. No command is sent if the Micro Smart Plug is switched ON or OFF wirelessly. |
4 | 5 | Metering - High Threshold - Set ON/OFF: When the Micro Smart Plug reaches over the high threshold of power defined by the configuration parameter, it will send OFF or ON command to the associateddevices. This group is configurable through the parameter 25 and 27. |
5 | 5 | Metering - Low Threshold - Set ON/OFF: When the Micro Smart Plug reaches below the low threshold of ower defined by the configuration parameter, it will send OFF or ON command to the associated devices. This group is configurable through the parameters 26 and 27. |
6 | 5 | Metering – Report: All the meter reports and notifications triggered by Metering parameters will be reported to the devices present in this group. This group is configurable through the parameters 21, 22, 23 and 24. |
Технология | Z-Wave+ |
---|---|
Z-Wave Plus: | Нет |
Производитель | NodOn |
Внутренняя/наружная установка | Внутренняя |
Тип диммера и выключателя | wall plug |
Источник питания | Кабель AC |
Форм-фактор | Штепсельная Розетка |
Назначение | Управление освещением, Управление энергоснабжением |
OTA обновление прошивки | Нет |
Напишите ваш собственный отзыв