Z-Wave Plus TKB Home Вставной модуль-выключатель
In-wall module for remotely controlling appliances in your home
- Single relay
- Resistive load 3000W
- Overload protection
- Support OTA firmware upgrade
This insert switch module in a transceiver which is a Z-Wave enabled device and is fully compatible with any Z-Wave enabled network. Z-Wave enabled devices displaying the Z-Wave logo can also be used with it regardless of the manufacturer, and ours can also be used in other manufacturer's Z-Wave enabled networks.
Remote On/Off control of the connected load is possible with other manufacturer's wireless controller. Each switch is designed to act as a repeater. Repeaters will re-transmit the RF signal to ensure that the signal is received by its intended destination by routing the signal around obstacles and radio dead spots.
The product supports Over The Air(OTA) feature for the products firmware upgrade.
Чем больше диапазон действия, тем более надежным является продукт - устройство имеет первоклассную антенну. Оптимизированное для надежности, это устройство может взаимодействовать беспроводным способом на расстояния более 150 метров.
Лучше антенна. Лучше Z-Wave. Устройство разработано на технологии Z-Wave Plus последнего 5го поколения, чтобы предоставить вам самое быстрое время отклика и оптимальное время жизни батареи между перезарядками.
Если вы используете устройство для обеспечения безопасности, вы хотите чтобы взаимодействие было защищенным. Вот почему устройство использует беспроводное шифрование AES-128 для защиты от несанкционированного доступа и хакеров.
Используете ли вы устройство для комфорта или безопасности, вы желаете чтобы оно всегда оставалось обновленным до последней версии. Как бы не создавались обновления прошивки для устройства, вы всегда можете обновить его с помощью Microsoft Windows или выбрать Z-Wave контроллер.
Technical Specification
- MODEL NUMBER
- TZ78
- HARDWARE
- Z-Wave Chip 500 series
- COMMUNICATION PROTOCOLS
- Z-Wave Plus
- FEATURES
- Relay protect technology
- LED AND BUTTONS
- LED indicator
- Include/Exclude button
- ASSOCIATION GROUP
- One group and 5 device (nodes)
- MAXIMUM LOAD
- 13A (Resistive)
- OVERCURRENT PROTECTION
- Yes
- DIMENSIONS
- 47.5 x 39 x 15.6 mm (LxWxH)
- CERTIFICATIONS
- FCC, Z-Wave
- POWER SUPPLY
- Input: AC 100-240VAC, 50-60Hz
- POWER CONSUMPTION
- up to 0.8W
- RADIO SIGNAL POWER
- up to 1mW
- RANGE
- up to 50m (outdoors) and 40m (indoors)
- OPERATIONAL TEMPERATURE
- 0-40°C
- FOR INSTALLATION IN BOXES
- D ≥ 50mm, depth ≥ 60mm
Package content
- Unit
- User manual
Z-Wave Specification
- Z-Wave Alliance
- Manufacturer
Z-Wave Association Capabilities
Model: In Wall Dual relay(1 way) switch module (PAN06-1A)
Z-Wave Certification Number: ZC10-14120009
Group ID |
Maximum Nodes |
Description |
1 | 1 | Z-Wave Plus Lifeline For group 1, the Switch will report ON/OFF status of Relay1 and Relay2 |
2 | 1 | For group 2, the Switch will report ON/OFF status of Relay1 |
3 | 1 | For group 3, the Switch will report ON/OFF status of Relay2 |
Z-Wave Configuration Capabilities
Model: In Wall Dual relay(1 way) switch module (PAN06-1A)
Z-Wave Certification Number: ZC10-14120009
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
1 | 1 | Selected Relay | 1 | Select relay1 : Only relay1 can be controlled and report. | |
2 | Select relay2 : Only relay2 can be controlled and report. | ||||
3 (Default) |
Select relay1 & relay2 :Relay1 and relay2 can be controlled and report at the same time. | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
2 | 1 | Edge / Pulse / Edge-Toggle mode | 1 (Default) |
Edge mode: this mode is suitable for the bi stable wall switch that has indicator point on the switch, and the same position correspond to same state of relay1 and relay2. if the PAN06 relay change the state because of receiving Z-Wave RF command, it may need two times of change (switch on to off or switch off to on) to let relay back to the correspond state. | |
2 | Pulse mode: this mode is suitable for the toggle type wall switch to swap the state of Relay1 or Relay2. | ||||
3 | Edge-Toggle mode: this mode is suitable for the normal bi-stable switch, every time when change the state of the wall switch will also swap the state of Relay1 or Relay2 | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
3 | 1 | Restore switch state mode | 0 | SWITCH OFF | |
1 (Default) |
LAST SWITCH STATE | ||||
2 | SWITCH ON | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
4 | 2 | Auto off timer | 0 (Default) |
Disable auto off function | |
1 to 32767 | 1s ~ 32767s | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
5 | 1 | RF off command mode | 0 (Default) |
Switch Off : It switches to OFF state. The default setting is Switch Off. | |
1 | Ignore : The switch off command will be ignored. | ||||
2 | Switch Toggle : It switches to the inverse of current state. | ||||
3 | Switch On : It switches to ON state. | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
6 | 1 | Existence of Endpoint3 | 1 (Default) |
Endpoint3 exist | |
2 | No Endpoint3 |
Z-Wave Command Classes
Model: In Wall Dual relay(1 way) switch module (PAN06-1A)
Z-Wave Certification Number: ZC10-14120009
Supported Command Classes |
Alarm |
All Switch |
Association |
Association Group Information |
Basic |
Configuration |
Device Reset Local |
Firmware Update Meta Data |
Manufacturer Specific |
Multi-Channel |
Powerlevel |
Protection |
Scene Activation |
Scene Actuator Configuration |
Switch Binary |
Version |
ZWavePlus Info |
User manual
- Manual (RUS)
- Manual (ENG)
- Manufacturer manual
Guides
- Guides (RUS)
- Guides (ENG)
- Manufacturer guides
Z-Wave Plus: | Нет |
---|---|
Z-Wave аппаратная платформа | SD3502 |
Z-Wave тип библиотеки | Enhanced 232 Slave |
Z-Wave тип устройства | On/Off Power Switch |
Z-Wave тип роли | Always On Slave |
Технология | Z-Wave+ |
Внутренняя/наружная установка | Внутренняя |
Производитель | TKB Home |
Группы ассоциаций | 1 |
Z-Wave Функции | Запуск сцен, Multichanel |
Поддерживаемые типы выключателей/управления | Кнопочный, Тумблерный, Кулисный, Без подсветки |
Максимальная нагрузка | 13A |
Тип диммера и выключателя | insert module |
Источник питания | Кабель AC |
Тип проводной системы | 3-Wire |
Тип вставного модуля | Relay - Single |
Функции вставных модулей | Дополнительные входы, Выход сухой контакт |
Способы нажатия | Одно нажатие |
Форм-фактор | Монтаж в стену |
Назначение | Управление освещением |
OTA обновление прошивки | Да |