Z-Wave Plus Aeotec Домашний счетчик электроэнергии

Есть в наличии
SKU
AEO_ZW095
Начиная с 6 290,00 руб.

Enables you to easily monitor the power consumption of your entire home

  • Works with any Z-Wave network
  • Easy installation inside your main electricity box
  • Wirelessly report immediate wattage and kWh usage to central control point gateways
  • The device has one clamp and reports W and kWH
  • Z-Wave Plus Certified

Зажимной измеритель электроэнергии (Home Energy Monitor) - это низкое по стоимости решение для мониторинга электроэнергии целого дома. Оно может беспроводным способом немедленно доносить потребление энергии в Вт и кВТ*ч центральному шлюзу управления и может быть легко и просто установлено кем угодно.

Простота и безопасность - первостепенны. Электрики не требуются для установки Home Energy Monitor. Покупателям не требуется обращаться с незащищенными проводами. Трансформаторные крепления тока обжимают  провода электрической сети для определения энергопотребления целого дома. Основной корпус фиксируется используя заднее крепление, которое легко открывается для замены батарей каждый 1 год.

Зажимной измеритель электроэнергии сообщает показания в Вт и кВт*ч.


You hear a lot about energy use these days. About how if we reduce the amount of energy we use we can not only save money but also save the environment. But saving money by using less electricity is only possible if we understand when and how we use it. That’s what Aeotec’s Z-Wave Home Energy Meter provides you with – understanding.

Installed in an electricity box, the energy meter will monitor the total consumption of electricity used by an entire building. And its intelligent clamps will report that energy use back to your Z-Wave gateway or controller, in watts or kilowatt-hours, and in real time. So you can see how much electricity you really use and when you use it.

z-wave wireless meter
Fantastic wireless range.
It wires into your electricity box for improved performance, and it also offers the same great wireless communication that you’ll find across all of Aeotec’s Z-Wave products. In fact, when perfectly positioned, the Home Energy Meter’s will be able to communicate your home’s electricity use to Z-Wave devices up to 300ft / 90m away.
z-wave electricity monitor
Improved accuracy.
The first energy monitor we made recorded basic electricity usage, but our latest model takes it to a whole new level. Now you’ll have access to all the data you need, whether that’s the amount of watts your home is using or the amount of kilowatt-hours you should be charged for, and all in real-time.
Quick facts.
The Z-Wave energy meter is currently available for use with Z-Wave systems in Australia, Europe, the United Kingdom, and the United States. It is certified with FCC, CE, C-TICK, and ROHS approvals.

The Home Energy Meter connects to mains power in your electricity box, as such a professional electrician is required for a safe installation.

Радиус действия

Чем больше диапазон действия, тем более надежным является продукт - устройство имеет первоклассную антенну. Оптимизированное для надежности, это устройство может взаимодействовать беспроводным способом на расстояния более 150 метров.

Поколение 5

Лучше антенна. Лучше Z-Wave. Устройство разработано на технологии Z-Wave Plus последнего 5го поколения, чтобы предоставить вам самое быстрое время отклика и оптимальное время жизни батареи между перезарядками.

Безопасность

Если вы используете устройство для обеспечения безопасности, вы хотите чтобы взаимодействие было защищенным. Вот почему устройство использует беспроводное шифрование AES-128 для защиты от несанкционированного доступа и хакеров.

Беспроводное обновление

Используете ли вы устройство для комфорта или безопасности, вы желаете чтобы оно всегда оставалось обновленным до последней версии. Как бы не создавались обновления прошивки для устройства, вы всегда можете обновить его с помощью Microsoft Windows или выбрать Z-Wave контроллер.

Technical Specification

  • HARDWARE
    • Z-Wave Chip 500 series
  • COMMUNICATION PROTOCOLS
    • Z-Wave Plus
  • MEASURE RANGE OF VOLTAGE:
    • 180V~ to 260V~ (EU/AU version, 1P/3P4) 
    • 220V~ to 400V~ (EU/AU version, 3P3)
  • MEASURE RANGE OF CURENT:
    • 0A to 200A
  • OVERCURRENT PROTECTION
    • Required external 200A circuit breaker
  • DIMENSIONS
    • Packing size:10x10x8 cm (LxWxH)
    • Base size: 5x3x7 cm (LxWxH)
  • CERTIFICATIONS
    • CE, Z-Wave
  • POWER SUPPLY
    • Input: 230V~, 50Hz, 10mA (EU/AU version, 1P/3P4)
    • Input: 380V~, 50Hz, 18mA (EU/AU version, 3P3)
  • POWER CONSUMPTION
    • up to 1W
  • RADIO SIGNAL POWER
    • up to 1mW
  • RANGE
    •  up to 100m (outdoors) and 40m (indoors)
  • OPERATIONAL TEMPERATURE
    • 0-40°C
  • RELATIVE HUMIDITY: 
    • 8% to 80%.
  • IP CODE
    • IP43

Package content

  • Unit
  • User manual

Z-Wave Association Capabilities


Group ID

Maximum Nodes

Description

1 5 Z-Wave Plus Lifeline. The automatic reports (configured by parameter 101/102/103) can be sent to the associated nodes in association group 1.

Z-Wave Configuration Capabilities


Parameter Number

Parameter Size

Parameter Name

Parameter Values

10 1 Percentage change in wattage to induce a automatic report 0 to 100
(Default)
The available range is 0 to 100.
101 4 To set which report need to be sent. 4096 Report Accumulated kWh of Channel 2.
  65535 Report Instantaneous Voltage of Channel 1.
  196608 Report Instantaneous Voltage of Channel 2.
  524288 Report Instantaneous Current (Amperes) of Channel 1.
  1048576 Report Instantaneous Current (Amperes) of Channel 2.
  1 Report Accumulated kWh of whole HEM
  2048 Report Accumulated kWh of Channel 1.
  2
(Default)
Report Instantaneous Watts of whole HEM.
  4 Report Instantaneous Voltage of whole HEM.
  8 Report Instantaneous Current (Amperes) of whole HEM.
  256 Report Instantaneous Watts of Channel 1.
  768 Report Instantaneous Watts of Channel 2.
  1024 Report Instantaneous Watts of Channel 3.
  8192 Report Accumulated kWh of Channel 3.
  262144 Report Instantaneous Voltage of Channel 3.
  2097152 Report Instantaneous Current (Amperes) of Channel 3.
102 4 To set which report need to be sent. 1
(Default)
Report Accumulated kWh of whole HEM
  2 Report Instantaneous Watts of whole HEM.
  4 Report Instantaneous Voltage of whole HEM.
  8 Report Instantaneous Current (Amperes) of whole HEM.
  256 Report Instantaneous Watts of Channel 1.
  768 Report Instantaneous Watts of Channel 2.
  2048 Report Accumulated kWh of Channel 1.
  4096 Report Accumulated kWh of Channel 2.
  65535 Report Instantaneous Voltage of Channel 1.
  196608 Report Instantaneous Voltage of Channel 2.
  524288 Report Instantaneous Current (Amperes) of Channel 1.
  1048576 Report Instantaneous Current (Amperes) of Channel 2.
  8192 Report Accumulated kWh of Channel 3.
  262144 Report Instantaneous Voltage of Channel 3.
  2097152 Report Instantaneous Current (Amperes) of Channel 3.
  1024 Report Instantaneous Watts of Channel 3.
103 4 To set which report need to be sent. 1 Report Accumulated kWh of whole HEM
  2 Report Instantaneous Watts of whole HEM.
  4 Report Instantaneous Voltage of whole HEM.
  8 Report Instantaneous Current (Amperes) of whole HEM.
  256 Report Instantaneous Watts of Channel 1.
  768 Report Instantaneous Watts of Channel 2.
  2048 Report Accumulated kWh of Channel 1.
  4096 Report Accumulated kWh of Channel 2.
  65535 Report Instantaneous Voltage of Channel 1.
  196608 Report Instantaneous Voltage of Channel 2.
  524288 Report Instantaneous Current (Amperes) of Channel 1.
  1048576 Report Instantaneous Current (Amperes) of Channel 2.
  1024 Report Instantaneous Watts of Channel 3.
  2097152 Report Instantaneous Current (Amperes) of Channel 3.
  262144 Report Instantaneous Voltage of Channel 3.
  8192 Report Accumulated kWh of Channel 3.
11 1 Percentage change in wattage to induce a automatic report 0 to 100
(Default)
The available range is 0 to 100.
111 4 Set the interval time of sending report. 0 to 268435456
(Default)
Interval Seconds
112 4 Set the interval time of sending report. 0 to 268435456
(Default)
Interval Seconds
113 4 Set the interval time of sending report. 0 to 268435456
(Default)
Interval Seconds
2 1 Set the energy detection mode for parameter 101 to 103. 3 Report positive/negative power and only report energy negative part (generating electricity).
  0
(Default)
Report absolute value for power and energy measurements.
  1 Report positive/negative power and report the algebraic sum energy
  2 Report positive/negative power and only report energy positive part (consuming electricity)
200 1 Partner ID 0
(Default)
Aeon Labs Standard Product
  1 to 127 Partner ID of Partner Product
252 1 Enable/Disable Lock Configuration 0
(Default)
All configuration parameters are configurable.
  1 All configuration parameters are not configurable (Locked)
255 4 Reset to default factory setting 1 Resets all configuration parameters to default setting.
  1431655765 Reset the product to default factory setting and be excluded from the Z-wave network
3 1 Enable/disable selective reporting only when power change reaches a certain threshold or percentage 1
(Default)
Enable.
  0 Disable
4 2 Threshold change in wattage to induce a automatic report 0 to 60000
(Default)
The available range is 0 to 60000.
5 2 Threshold change in wattage to induce a automatic report 0 to 60000
(Default)
The available range is 0 to 60000.
6 2 Threshold change in wattage to induce a automatic report 0 to 60000
(Default)
The available range is 0 to 60000.
7 2 Threshold change in wattage to induce a automatic report 0 to 60000
(Default)
The available range is 0 to 60000.
8 1 Percentage change in wattage to induce a automatic report 0 to 100
(Default)
The available range is 0 to 100.
9 1 Percentage change in wattage to induce a automatic report 0 to 100
(Default)
The available range is 0 to 100.

Z-Wave Command Classes


Supported Command Classes
 
        Association Group Information
        Association V2
        CRC16 Encapsulation
        Device Reset Local
        Manufacturer Specific V2
        Meter V4
        Multi-Channel_V4
        Multi-Channel-Association_V2
        Powerlevel
        Security
        Version V2
        Z-Wave Plus Info V2

User manual

Guides

  • Guides
Дополнительная информация
Технология Z-Wave+
Z-Wave Plus: Нет
Z-Wave аппаратная платформа ZM5202
Z-Wave тип библиотеки Enhanced 232 Slave
Z-Wave тип устройства Sub Energy Meter
Z-Wave тип роли Always On Slave
Производитель Aeotec
Группы ассоциаций 1
Z-Wave Функции Multichanel , Multichannel Association
Внутренняя/наружная установка Внутренняя
Источник питания Кабель AC
Назначение Управление энергоснабжением
OTA обновление прошивки Да
Форм-фактор Настенный, DIN рейка
Напишите ваш собственный отзыв
Вы пишете отзыв на товар:Z-Wave Plus Aeotec Домашний счетчик электроэнергии
Ваша оценка
Copyright © 2009-2017 Swinestudio. All rights reserved.