Z-Wave Plus Fibaro Розетка
Most sophisticated device
FIBARO модуль выключатель для розетки с функцией измерения мощности является интеллектуальным, сверх компактным, самым изысканным, дистанционно управляемым адаптером для розетки. Это очень функциональный модуль может быть применен везде, где вы хотите управлять электрическими устройствами, и в то же время контроллировать энергопотребление в удобным и технически простым способом.
FIBARO Wall Plug with power metering feature is an intelligent, ultimate plug & play, extremely compact, most sophisticated, remotely controlled outlet adapter.
This highly functional wall plug can be applied wherever you want to control electrical devices, while monitoring power consumption in a convenient and maintenance-free way.
Extremely Compact and Beautiful
FIBARO Wall Plug is the smallest and most attractive device of this type available in the world. Its modern design perfectly fits in with any interior design. Look at the surface smoothness and its beautiful crystal power ring.
Competitors solutions
ULTRA PLUG PLAY
The Wall Plug requires no installation tools or electrician. Just take it out of the box, put it into an electrical outlet, and plug in any electrical device. The user-friendly interface ensures an easy and intuitive way of adding Wall Plugs to the FIBARO System.
Excellence in design
Each component was created with masterful precision and tested in extreme conditions. FIBARO Wall Plug is the product designed for you.
Despite hundreds of technical challenges, it was designed and created without compromise. The device is not a simple remote
control plug, it is a real engineering masterpiece. Take it in your hands, and see the love our engineers gave to this device.
Real time energy monitoring
Check the current energy consumption in your home within the configuration interface of Home Center 2
Find vampire power devices and decide on their activities.
Current consumption
Check the current energy consumption in whole house at one meter.
Check historical consumption
Clear and detailed power consumption graphs show the history of energy usage. It gives you
the opportunity to control and effectively plan energy consumption costs.
Consumption history
On clear and detailed power consumption graphs.
Easily compare different devices
Energy consumption of all devices connected to the System is presented in extremely
intuitive pie charts, in relation, by percentage.
Pie chart
Comparing the energy consumption of equipment or rooms.
Save money on every room
You can see a list of the top 5 energy consumers in your home. The chart in Home Center 2 interface
may either point out the devices or the rooms. Verify energy class of your household equipment.
TOP5 consumption
The device, or in areas.
Child safety
The device is equipped with a special, built-in plug cover that provides socket safety. This is especially useful in protecting your babies, whose curiosity and creativity in their youngest years is endless.
Faulty device report
The device is the safest wall plug in the world because it doesn’t allow inclusion of a damaged device if it is short circuited, thereby protecting the entire electrical system against damage. It can also report if the device is not working properly.
* SMS service is not available in all countries
Load under control
FIBARO Wall Plug is a one of a kind miniature device that allows you to control the amount of electricity
consumed. Change in color of the flawless crystal LED ring informs you about the current load of the connected
appliance. Besides that, built-in temperature sensor will alert you with flashing purple light if the temperature
exceeds 55oC. The alarm will also run if you go beyond the maximum permissible load of 2.5 kW.
Built-in network range tester
The FIBARO Wall Plug has a unique feature of testing the intelligent Z-Wave network coverage. Ultra easy, extremely fast network read time testing shows actual connectivity status.
Start the process by pressing the button on the plug’s casing for a few seconds. LED's purple light will inform you that the plug is in testing mode. See the current coverage by color displayed.
Babysitter
Clear rules and guidelines are extremely important in raising children. FIBARO, can help you even in this area.
Connect the Wall Plug to a game console or TV in the children's room and remotely decide when your children can use the
connected devices. You can permanently set the availability of the console and / or TV and remotely control their operation.
Strain Relief
How many times have you had to repair your broken outlet?
With FIBARO you can get rid of this annoying task forever.
Each Wall Plug is equipped with specially designed safety sticker
that prevents strain relief.
Wireless update
You can upgrade the device wirelessly, by choosing that option in Home Center 2, anytime a new firmware is available.
You don’t have to disconnect it from a wall socket and waste time connecting it to computer. Just press update button and
enjoy the time with your loved one.
Bedside lamp feature
The Wall Plug's amazing LED ring illuminates with a pale blue or white light while it’s connected to the
power outlet, which ideally plays a role of a bedside lamp. The ultra soft light can be set temporally by
pressing the button on the Wall Plug's casing.
Чем больше диапазон действия, тем более надежным является продукт - устройство имеет первоклассную антенну. Оптимизированное для надежности, это устройство может взаимодействовать беспроводным способом на расстояния более 150 метров.
Лучше антенна. Лучше Z-Wave. Устройство разработано на технологии Z-Wave Plus последнего 5го поколения, чтобы предоставить вам самое быстрое время отклика и оптимальное время жизни батареи между перезарядками.
Если вы используете устройство для обеспечения безопасности, вы хотите чтобы взаимодействие было защищенным. Вот почему устройство использует беспроводное шифрование AES-128 для защиты от несанкционированного доступа и хакеров.
Используете ли вы устройство для комфорта или безопасности, вы желаете чтобы оно всегда оставалось обновленным до последней версии. Как бы не создавались обновления прошивки для устройства, вы всегда можете обновить его с помощью Microsoft Windows или выбрать Z-Wave контроллер.
Technical Specification
- HARDWARE
- Z-Wave Chip 500 series
- COMMUNICATION PROTOCOLS
- Z-Wave Plus
- MAXIMUM LOAD
- AC 220V-240V: 2500W
- DIMENSIONS
- Packing size:50x50x80 mm (LxWxH)
- Base size:43x65 mm (DxH)
- CERTIFICATIONS
- CE, Z-Wave
- POWER SUPPLY
- Input: AC 220V-240VAC, 50-60Hz
- POWER MEASUREMENTS ACCURACY:
- +/- 0.5% (up to 1 kW)
- +/- 1.5% (1 kW to 2 kW)
- +/- 2% (above 2 kW)
- POWER CONSUMPTION
- up to 1.6W
- RADIO SIGNAL POWER
- up to 0.8mW
- RANGE
- up to 50m (outdoors) and 40m (indoors)
- OPERATIONAL TEMPERATURE
- 0-50°C
- IP CODE
- IP20
Package content
- Unit
- User manual
Z-Wave Specification
Z-Wave Association Capabilities
Model: FIBARO Wall Plug E/F (FGWPE/F-102)
Z-Wave Certification Number: ZC10-16035016
Group ID |
Maximum Nodes |
Description |
1 | 1 | “Lifeline” reports the device status and allows for assigning single device only (main controller by default). |
2 | 10 | “On/Off (button)” devices in this group will be switched on or off when relay status is changed using the B-button (done via BASIC SET command frames). |
3 | 10 | “On/Off (power)” devices in this group will be switched on or off depending on the current load (done via BASIC SET command frames). |
Z-Wave Configuration Capabilities
Model: FIBARO Wall Plug E/F (FGWPE/F-102)
Z-Wave Certification Number: ZC10-16035016
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
1 | 1 | Always On function | 0 (Default) |
function inactive | |
1 | function activated | ||||
10 | 1 | High priority power report | 1 to 99 (Default) |
power change in percent | |
100 | reports are disabled | ||||
11 | 1 | Standard power report | 1 to 99 (Default) |
power change in percent | |
100 | reports are disabled | ||||
12 | 2 | Power reporting interval | 5 to 600 (Default) |
in seconds | |
13 | 2 | Energy reporting threshold | 0 | energy reports inactive | |
1 to 500 (Default) |
(0.01-5kWh, step 0.01kWh) - threshold | ||||
14 | 2 | Power and energy periodic reports | 0 | periodic reports inactive | |
5 to 32400 (Default) |
in seconds | ||||
15 | 1 | Measuring energy consumed by the Wall Plug itself | 0 (Default) |
function inactive | |
1 | function activated | ||||
2 | 1 | Remember device status after a power failure | 0 | device remains switched off | |
1 (Default) |
device restores the state from before the power failure | ||||
20 | 1 | Control of „On/Off (Button)” association group (2) devices | 0 (Default) |
control as the Wall Plug | |
1 | control opposite to the Wall Plug | ||||
21 | 2 | DOWN value - „On/Off (Power)” association group (3) | 0 to 24900 (Default) |
(0.0-2490.0W, step 0.1W) | |
22 | 2 | UP value - „On/Off (Power)” association group (3) | 100 to 25000 (Default) |
10.0-2500.0W, step 0.1W) | |
23 | 1 | The response after exceeding defined power values | 1 | turn the associated devices ON, once the power drops below DOWN value (parameter 21) | |
2 | turn the associated devices OFF, once the power drops below DOWN value (parameter 21) | ||||
3 | turn the associated devices ON, once the power rises above UP value (parameter 22) | ||||
4 | turn the associated devices OFF, once the power rises above UP value (parameter 22) | ||||
5 | combination of 1 and 4. Turn the associated devices ON, once the power drops below DOWN value (parameter 21). Turn the associated devices OFF, once the power rises above UP value (parameter 22). | ||||
6 (Default) |
combination of 2 and 3. Turn the associated devices OFF, once the power drops below DOWN value (parameter 21). Turn the associated devices ON, once the power rises above UP value (parameter 22). | ||||
24 | 2 | SWITCH ON value - „On/Off” association groups | 0 to 99 | ||
255 (Default) |
|||||
3 | 2 | Overload safety switch | 0 (Default) |
function inactive | |
10 to 30000 | (1.0-3000.0W, step 0.1W) - power threshold | ||||
30 | 1 | Active alarms | 1 | general alarm | |
2 | smoke alarm | ||||
4 | CO alarm | ||||
8 | CO2 alarm | ||||
16 | high temperature alarm | ||||
32 | flood alarm | ||||
31 | 1 | Response to alarm frames | 0 (Default) |
no reaction | |
1 | turn connected device on | ||||
2 | turn connected device off | ||||
5 to 50 | (0.5-50.0s, step 0.1s) - cyclically change device state with set period | ||||
32 | 2 | Alarm state duration | 1 to 32400 (Default) |
in seconds | |
40 | 2 | Power load for violet colour | 1000 to 30000 (Default) |
100.0-3000.0W, step 0.1W | |
41 | 1 | LED ring colour when controlled device is on | 0 | illumination turned off completely | |
1 (Default) |
colour changes continuously depending on active power | ||||
2 | colour changes in steps depending on active power | ||||
3 | white | ||||
4 | red | ||||
5 | green | ||||
6 | blue | ||||
7 | yellow | ||||
8 | cyan | ||||
9 | magenta | ||||
42 | 1 | LED ring illumination colour when controlled device is off | 0 (Default) |
illumination turned off completely | |
1 | LED ring is illuminated with a colour corresponding to the last measured power, before the controlled device was turned off | ||||
3 | white | ||||
4 | red | ||||
5 | green | ||||
6 | blue | ||||
7 | yellow | ||||
8 | cyan | ||||
9 | magenta | ||||
43 | 1 | LED ring illumination colour at the Z-Wave network alarm detection | 0 (Default) |
illumination turned off completely | |
1 | no change in colour. LED ring colour is determined by settings of parameters 41 or 42 | ||||
2 | LED ring flashes red/blue/white | ||||
3 | white | ||||
4 | red | ||||
5 | green | ||||
6 | blue | ||||
7 | yellow | ||||
8 | cyan | ||||
9 | magenta | ||||
50 | 1 | Associations in Z-Wave network security mode | 0 | none of the groups sent as secure | |
1 | 2nd group sent as secure | ||||
2 | 3rd group sent as secure | ||||
3 (Default) |
2nd and 3rd group sent as secure |
Z-Wave Command Classes
Model: FIBARO Wall Plug E/F (FGWPE/F-102)
Z-Wave Certification Number: ZC10-16035016
Supported Command Classes |
Application Status |
Association Group Information |
Association V2 |
Basic |
Configuration |
CRC16 Encapsulation |
Device Reset Local |
Firmware Update MD V3 |
Manufacturer Specific V2 |
Meter V2 |
Multi Channel Association V3 |
Notification V5 |
Powerlevel |
Security |
Sensor Multilevel V5 |
Switch Binary |
Version V2 |
Z-Wave Plus Info V2 |
Controlled Command Classes |
Basic |
Multi Channel V4 |
Технология | Z-Wave+ |
---|---|
Z-Wave Plus: | Нет |
Z-Wave аппаратная платформа | ZM5202 |
Z-Wave тип библиотеки | Routing slave |
Z-Wave тип устройства | On/Off Power Switch |
Z-Wave тип роли | Always On Slave |
Производитель | Fibaro |
Максимальная нагрузка | 11A |
Группы ассоциаций | 1 |
Z-Wave Функции | Power Level |
Внутренняя/наружная установка | Внутренняя |
Тип диммера и выключателя | wall plug |
Источник питания | Кабель AC |
Форм-фактор | Штепсельная Розетка |
Функции розетки | Измерение мощности |
Назначение | Управление освещением, Управление энергоснабжением |
OTA обновление прошивки | Да |