Z-Wave Plus NodON Настенный выключатель
Wireless Z-Wave Wall Switch
- Dual-channel connectivity
- Control Z-Wave Devices
- Easy Installation
- Different colors
Беспроводное управление Z-Wave устройствами
NodOn® настенный выключатель может быть настроен для беспроводного управления устройствами Z-Wave в вашей системе автоматизации дома. Настенный выключатель можно использовать для дистанционного управления (включения / выключения) двумя группами устройств Z-Wave с помощью двух клавиш. При использовании в помещении, настенный выключатель NodOn® может быть сконфигурирован для работы и управления любым устройством, расположенном в радиусе 30 метров.
Запуск преднастроенных сцены
Кроме управления устройствами Z-Wave напрямую, умный контроллер также позволяет запускать индивидуальные сцены, что позволяет управлять несколькими устройствами Z-Wave нажатием кнопки.
Увеличенное время работы от батареи
Z-Wave NodOn® настенный выключатель питается от батареи CR2032, которая обещает работу от 1,5 до 2 лет.
Повышенная безопасность
Устройство использует безопасные протоколы связи, общаясь с чувствительными Z-Waveустройствами, такими как дверные замки и камеры безопасности. В случае, если устройство не поддерживает расширенные протоколы безопасности, контроллер также имеет обратную совместимость для управления нормальными устройствами Z-Wave.
Простая установка
Z-Wave NodOn® настенный выключатель поставляется вместе с настенными монтажными пластинами, которые могут быть установлены с помощью шурупов (не входят в комплект) или просто с помощью двухстороннего скотча на задней поверхности пластины.
The Wall Switch can directly control any kind of Z-Wave® or Z-Wave Plus® compliant devices such as Smart Plug or trig scenes through a Z-Wave® or Z-Wave Plus® Home Automation Gateway (Gateway Mode).
If you hesitate to invest in a home automation gateway, Wall Switch can control directly (as the Primary Controller) all the compatible Z-Wave® devices of your home. Later, you will be able to integrate your remote control in a home automation gateway in order to upgrade your installation.
Z-Wave NodOn® Wall Switch is a wireless smart switch that lets you take remote control of connected Z-Wave devices in your home automation network. The innovative wall switch from NodOn is battery-powered to provide convenient and flexible installation. It also comes with easy-to-install wall mounting plates for convenient and hassle-free installation.
The smart wall switch comes in two colour variants: Cozy White and Cozy Grey that can be selected from the dropdown above.
-
Control Z-Wave devices wirelessly
Wall Switch can be configured to wirelessly control Z-Wave devices in your home automation system. The Wall Switch can be used to remotely control (turn on/off) upto two groups of Z-Wave devices with 2 half buttons. When used indoors, NodOn wall switch can be configured to operate and control any device that's within 30 metres of distance.
-
Superior Battery Life
Z-Wave Wall Switch is powered by a light-weight CR2032 battery that promises a lifetime of 1.5 to 2 years.
-
Easy Installation
Wall Switch comes with wall mounting plates, which can be installed with screws (not included in the packaging) or simply using double sided strips at the back of the wall plate.
Чем больше диапазон действия, тем более надежным является продукт - устройство имеет первоклассную антенну. Оптимизированное для надежности, это устройство может взаимодействовать беспроводным способом на расстояния более 150 метров.
Лучше антенна. Лучше Z-Wave. Устройство разработано на технологии Z-Wave Plus последнего 5го поколения, чтобы предоставить вам самое быстрое время отклика и оптимальное время жизни батареи между перезарядками.
Если вы используете устройство для обеспечения безопасности, вы хотите чтобы взаимодействие было защищенным. Вот почему устройство использует беспроводное шифрование AES-128 для защиты от несанкционированного доступа и хакеров.
Используете ли вы устройство для комфорта или безопасности, вы желаете чтобы оно всегда оставалось обновленным до последней версии. Как бы не создавались обновления прошивки для устройства, вы всегда можете обновить его с помощью Microsoft Windows или выбрать Z-Wave контроллер.
Technical Specification
- MODEL NUMBER
- CWS-3-1-0X
- HARDWARE
- Z-Wave Chip 500 series
- COMMUNICATION PROTOCOLS
- Z-Wave Plus
- FEATURES
- Short click or long-press to activate automation scenarios and dim associated Z-Wave lights
- Z-WAVE GROUPS
- Seven groups and eight devices (nodes)
- LEDS AND BUTTONS
- 2 buttons
- LED indicator
- DIMENSIONS
- Packing size: (LxWxH)
- Base size: 80 x 80 x 15mm (DxH)
- CERTIFICATIONS
- CE, Z-Wave
- POWER SUPPLY
- Battery: CR2032
- POWER CONSUMPTION
- up to 1.6W
- RADIO SIGNAL POWER
- up to 0.8mW
- RANGE
- up to 50m (outdoors) and 40m (indoors)
- OPERATIONAL TEMPERATURE
- 0-40°C
- OPERATIONAL TEMPERATURE
- 8-80%
- IP CODE
- IP20
- WEIGHT
- 52 g
Package content
- Unit
- WallMote
- Back-Mount plate
- Double-Sided tape
- User manual
Additional Info
Z-Wave Association Capabilities
Model: NodOn® wall switch (CWS-3-1-0X)
Z-Wave Certification Number: ZC10-15070008
Group ID |
Maximum Nodes |
Description |
1 | 1 | Z-Wave Plus® Lifeline. This group is used to report information of the OCTAN Remote to the Main Controller of the network. |
2 | 8 | Button 1 – MONO – Controlled nodes • A short press will activate (ON) your associated devices • A second short press will deactivate (OFF) your associated devices. If some of the associated devices have dimming features (light dimmer, roller shutter, etc.): • A long press will dim up your associated devices (light, roller shutter, etc.) until you release the button • A second long press on the same button will dim down your associated devices (light, roller shutter, etc.) until you release the button. |
3 | 8 | Button 2 – MONO – Controlled nodes • A short press will activate (ON) your associated devices • A second short press will deactivate (OFF) your associated devices. If some of the associated devices have dimming features (light dimmer, roller shutter, etc.): • A long press will dim up your associated devices (light, roller shutter, etc.) until you release the button • A second long press on the same button will dim down your associated devices (light, roller shutter, etc.) until you release the button. |
4 | 8 | Button 3 – MONO – Controlled nodes • A short press will activate (ON) your associated devices • A second short press will deactivate (OFF) your associated devices. If some of the associated devices have dimming features (light dimmer, roller shutter, etc.): • A long press will dim up your associated devices (light, roller shutter, etc.) until you release the button • A second long press on the same button will dim down your associated devices (light, roller shutter, etc.) until you release the button. |
5 | 8 | Button 4 – MONO – Controlled nodes • A short press will activate (ON) your associated devices • A second short press will deactivate (OFF) your associated devices. If some of the associated devices have dimming features (light dimmer, roller shutter, etc.): • A long press will dim up your associated devices (light, roller shutter, etc.) until you release the button • A second long press on the same button will dim down your associated devices (light, roller shutter, etc.) until you release the button. |
6 | 8 | Buttons 1&3 – DUO – Controlled nodes • A short press on button 1 will activate (ON) your associated devices. • A short press on button 3 will deactivate (OFF) your associated devices. If some of the associated devices have dimming features (light dimmer, roller shutter, etc.): • A long press on button 1 will dim up your associated device (light, roller shutter, etc.) until you release the button. • A long press on button 3 will dim down your associated device (light, roller shutter, etc.) until you release the button. |
7 | 8 | Buttons 2&4 – DUO – Controlled nodes • A short press on button 2 will activate (ON) your associated devices. • A short press on button 4 will deactivate (OFF) your associated devices. If some of the associated devices have dimming features (light dimmer, roller shutter, etc.): • A long press on button 1 will dim up your associated device (light, roller shutter, etc.) until you release the button. • A long press on button 3 will dim down your associated device (light, roller shutter, etc.) until you release the button. |
Z-Wave Configuration Capabilities
Model: NodOn® wall switch (CWS-3-1-0X)
Z-Wave Certification Number: ZC10-15070008
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
1 | 1 | Buttons 1&3 Profile | 1 | MONO. Button 1 is not paired with button 3. | |
2 | DUO. Button 1 is paired with button 3. | ||||
0 (Default) |
SCENE. Product sends “Central Scene Notification” Commands or “Scene Activation” Commands. | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
2 | 1 | Buttons 2&4 Profile | 0 (Default) |
SCENE. Product sends “Central Scene Notification” Commands or “Scene Activation” Commands. | |
2 | DUO. Button 1 is paired with button 3. | ||||
1 | MONO. Button 1 is not paired with button 3. | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
3 | 1 | Scene Type | 0 (Default) |
Use “CENTRAL SCENE” Commands. | |
1 | Use “SCENE ACTIVATION” Commands. | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
4 | 1 | Button 1 Configuration | 2 | Single Press sends broadcast “Switch All Off” Command. | |
0 (Default) |
Single Press sends “Basic Set” Command to associated devices in Group 2. | ||||
1 | Single Press sends broadcast “Switch All On” Command. | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
5 | 1 | Button 2 Configuration | 1 | Single Press sends broadcast “Switch All On” Command. | |
2 | Single Press sends broadcast “Switch All Off” Command. | ||||
0 (Default) |
Single Press sends “Basic Set” Command to associated devices in Group 3. | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
6 | 1 | Button 3 Configuration | 1 | Single Press sends broadcast “Switch All On” Command. | |
2 | Single Press sends broadcast “Switch All Off” Command. | ||||
0 (Default) |
Single Press sends “Basic Set” Command to associated devices in Group 4. | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
7 | 1 | Button 4 Configuration | 0 (Default) |
Single Press sends “Basic Set” Command to associated devices in Group 5. | |
1 | Single Press sends broadcast “Switch All On” Command. | ||||
2 | Single Press sends broadcast “Switch All Off” Command. | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
8 | 1 | Led Management | 0 (Default) |
Led does not acknowledge button action and does not acknowledge result of radio command sent. | |
1 | When the end-user performs a Single press, Double press or Hold Press on a button, led blinks blue to acknowledge the button action. | ||||
3 | Combined behaviors of 0x01 and 0x02 modes. | ||||
2 | When the end-user sends a controlled command: “Basic Set” Command “Central Scene Notification” Command “Multilevel Switch Stop Level Change” Command Led blinks GREEN to acknowledge transmission success or blinks RED to acknowledge transmission failed. |
Z-Wave Command Classes
Model: NodOn® wall switch (CWS-3-1-0X)
Z-Wave Certification Number: ZC10-15070008
Supported Command Classes |
Association |
Association Group Information |
Battery |
Central Scene |
Configuration |
Device Reset Local |
Manufacturer Specific |
Powerlevel |
Version |
Wake Up |
ZWavePlus Info |
Controlled Command Classes |
All Switch |
Application Status |
Basic |
Central Scene |
Scene Activation |
Switch Multilevel |
Wake Up |
ZWavePlus Info |
User manual
- Manual (RUS)
- Manual (ENG)
- Manufacturer manual
Guides
- Guides (RUS)
- Guides (ENG)
- Manufacturer guides
Технология | Z-Wave+ |
---|---|
Z-Wave Plus: | Нет |
Z-Wave аппаратная платформа | ZM5202 |
Z-Wave тип библиотеки | Enhanced 232 Slave |
Z-Wave тип устройства | Remote Control - Multi Purpose |
Z-Wave тип роли | Portable Controller |
Производитель | NodOn |
Источник питания | Батарея |
Тип батареи | CR2032 |
Группы ассоциаций | 8 |
Z-Wave Функции | Запуск сцен, Multichanel , Multichannel Association |
Способы нажатия | Одно нажатие, Долгое нажатие |
Тип контроллера | Wall Controller |
Тип пульта ДУ | Direct Device Control, Run Scenes in Gateway |
Форм-фактор | Настенный |
Назначение | Улучшение основной системы |
OTA обновление прошивки | Да |