Z-Wave Plus Aeotec Нано диммер
Universal Z-Wave Flush Dimmer to control all types of light sources.
- Enables Z-Wave control and dimming of your lights
- Works with all bulb types
- Works with LEDs, Halogens, CFL and Incandescent bulbs
- Monitors power consumption
Nano Dimmer
Make all your lights smart lights. Simply.
Nano Dimmer dramatically improves the lighting in your home. Our 3rd generation of invisible lighting controller outperforms all that has come before it. Dimming is smoother. Compatibility is broader. Lighting is faster and more responsive. Automation and intelligence have never been more powerful. And it comes in such a small size, that you’ll be amazed at just how much functionality we were able to craft inside. Perfect lighting is a part of every truly smart home. Lighting that is responsive. That is always the right brightness. That is always on when you need it, and off when you don’t. But perfect lighting has never been easy. Instead, perfect lighting has been too complicated to achieve. In the past, to automate your lights with Z-Wave you’ve had to worry about the type of wiring you have, whether your lighting is trailing or leading edge, and whether you’re using TRIACs or thyristors. Far too complicated. Get any of those wrong and your connected lighting would quickly become a connected headache. No more. Nano Dimmer offers smart, connected lighting without any of the hassle. |
Easy to install.
Nano Dimmer lets you add new and existing lights to your Z-Wave system. It makes your lights smarter. It makes them responsive. It gives you the ability to control them, schedule, dim them and brighten them.
All that control and intelligence comes from simply wiring Nano Dimmer behind an existing wall switch.
The best wiring
compatibility yet.
Light bulb compatibility used to be complex. Now it’s never been easier.
Powered by both its dedicated Lighting Engine and a dedicated 32-bit CPU, Nano Dimmer calculates lighting at unparalleled speeds. It calculates perfectly smooth dimming, and it calculates perfect bulb compatibility, self-adjusting its settings whenever a new bulb is attached.
That means that you won’t ever have a problem finding lights that works with Nano Dimmer’s list of compatible bulbs.
LED | Dimmable LED | CFL | Fluorescent | Incandescent | Halogen |
And that’s a list that’ll keep on growing. Lighting Engine can be upgraded, meaning that new compatibility calculations are only ever a firmware upgrade away.
Neutral not required.
Nano Dimmer isn’t just better at lighting compatibility, it’s better at wiring compatibility too.
Whether your lights are installed in a 2-wire or 3-wire system, Nano Dimmer is compatible. Lighting Engine auto-detects whether your light switches have a neutral wire or not, then automatically adjusts it settings.
Universal wiring compatibility | Works with neutral | Works without neutral |
Works with your existing light switch.
Nano Dimmer has been designed to enhance your home, not to completely change it.
That is why it is been designed to work with most of the light switches typically found in homes, new or old. It installs invisibly behind them, enhancing their functionality instead of completely replacing it. Nano Dimmer can be connected to the following light switches;
Toggle switch. | Rocker switch. | Pull-chain switch. | Push-button switch. | Wall switch. |
Works without any switch at all.
When you enhance your lighting with Nano Dimmer, you do so with the connectivity of Z-Wave Plus. Connectivity that lets you intelligently automate it, connectivity that lets you responsively control it, and connectivity that lets you manage and monitor it even when you’re not home.
Smooth dimming.
Dimming the lights in a room is beautiful. But it’s also technical. It takes what is known as phase control; the reduction of the amount of voltage a light bulb consumes along its trailing edge or leading edge.
And because smooth dimming is the definition of beautiful lighting, Nano Dimmer does it perfectly.
Whatever amount of light you need, Nano Dimmer delivers. It can dim your lights from between 0% and 100%. And it can dim them at perfect speed with Nano Dimmer offering an adjustable ramp rate allowing the brightness of your lights to adjust over moments or minutes.
Perfectly small.
The first Z-Wave in-wall dimmer? That was from Aeotec. We started engineering it in 2006 and then we followed up with the best-selling Micro Dimmer 2E. Now we’re replacing it with our all new Nano range.
To make an in-wall lighting controller this perfect means working from the ground up. But despite now being 60% smaller than our original technology, every single millimetre of Nano Dimmer benefits from our 10 year’s experience in making in-wall dimmers. That decade’s worth of expertise makes Nano Dimmer compact without compromise.
Micro Dimmer 52 x 49 x 18 inches | Micro Dimmer 2E 51.4 x 49 x 18.5 mm | Nano Dimmer 42 x 39. 5 x 20mm |
Perfectly safe.
Your lighting may be perfect, but that doesn’t mean the electricity powering it is. Things happen. Surges happen and are common, and Nano Dimmer protects against them. With a in-built surge and overload protector, Nano Dimmer not only keeps your lighting connected it keeps them protected.
Surge Protection | Overload Protection |
Perfectly upgraded.
New lights, no problems. |
250% faster. |
Gen5. |
No gateway, no worries. |
Dimming levels. |
Smooth dimming. |
Fan control. |
Lighting Engine. |
1.5 amps. |
Wireless control. |
Perfectly slim. |
See your spend. |
Stronger signal. |
DIN rail compatible. |
Secure lighting. |
Perfect with low voltage lights.
Homes increasingly have low energy lighting that is hard to dim. But not for Nano Dimmer. It can even dim low power LEDs and CFLs that use less than 20 watts through the use of a bypass.
Also from our lighting range.
Nano Dimmer is completely compatible with these products.
LED Bulb |
LED Strip |
Smart Dimmer 6 |
WallMote |
Nano Switch |
Чем больше диапазон действия, тем более надежным является продукт - устройство имеет первоклассную антенну. Оптимизированное для надежности, это устройство может взаимодействовать беспроводным способом на расстояния более 150 метров.
Лучше антенна. Лучше Z-Wave. Устройство разработано на технологии Z-Wave Plus последнего 5го поколения, чтобы предоставить вам самое быстрое время отклика и оптимальное время жизни батареи между перезарядками.
Если вы используете устройство для обеспечения безопасности, вы хотите чтобы взаимодействие было защищенным. Вот почему устройство использует беспроводное шифрование AES-128 для защиты от несанкционированного доступа и хакеров.
Используете ли вы устройство для комфорта или безопасности, вы желаете чтобы оно всегда оставалось обновленным до последней версии. Как бы не создавались обновления прошивки для устройства, вы всегда можете обновить его с помощью Microsoft Windows или выбрать Z-Wave контроллер.
Technical Specification
- MODEL NUMBER
- ZW111
- HARDWARE
- Z-Wave Chip 500 series
- Switching:
- COMMUNICATION PROTOCOLS
- Z-Wave Plus
- FEATURES
- Support for the connection of touch panel
- Power consumption measurement
- Supports SPDT (Single-Pole Double-Throw) switches
- LED AND BUTTONS
- LED indicator
- Include/Exclude button
- ASSOCIATION GROUP
- Four groups and five devices (nodes)
- MAXIMUM CURRENT
- 1.2 A / 230 VAC
- MAXIMUM LOAD
- 276 W (230 VAC) (Resistive)
- (Resistive-Inductive)
- (Resistive-Capacitive)
- OVERCURRENT PROTECTION
- required external circuit breaker
- POWER MEASUREMENT
- Power measurement accuracy: +/-3W.
- DIMENSIONS
- Package: 50 x 50 x 22 mm (LxWxH)
- Unit: 42.5 x 40 x 20 mm (LxWxH)
- CERTIFICATIONS
- FCC, Z-Wave
- POWER SUPPLY
- AC 100-240VAC, 50-60Hz
- POWER CONSUMPTION
- up to 0.8W
- RADIO SIGNAL POWER
- up to 1mW
- RANGE
- up to 50m (outdoors) and 40m (indoors)
- OPERATIONAL TEMPERATURE
- 0-40°C
- OPERATIONAL HUMIDITY
- 8-80%
- FOR INSTALLATION IN BOXES
- D ≥ 60mm, depth ≥ 60mm
- IP CODE
- IP20
- WEIGHT
- Net: 28 g
- Gross: 34 g
Package content
- Unit
- User manual
Z-Wave Specification
Z-Wave Association Capabilities
Model: Nano Dimmer (ZW111-C)
Z-Wave Certification Number: ZC10-17015388
Group ID |
Maximum Nodes |
Description |
1 | 5 | Z-Wave Plus Lifeline. When the load state of Nano Dimmer (on/off/dim the load ) is changed, the Hail CC, Switch Multilevel Report and Basic Report (configured by parameter 80) can be sent to the associated nodes in this group. |
2 | 5 | Forward the Basic Set, Switch Binary Set, Switch Multilevel Start Level Change, Switch Multilevel Stop Level Change, Switch Multilevel Set, Switch all to the associated nodes in Group 2 when the Nano Dimmer receives the Basic Set, Switch Binary Set, Switch Multilevel Start Level Change, Switch Multilevel Stop Level Change, Switch Multilevel Set, Switch all commands from main controller. |
3 | 5 | Send Basic Set (configured by parameter 0x51 ) to the associated nodes in Group 3 when the external switch S1 is operated |
4 | 5 | Send Basic Set (configured by parameter 0x52) to the associated nodes in Group 4 when the external switch S2 is operated |
Z-Wave Configuration Capabilities
Model: Nano Dimmer (ZW111-C)
Z-Wave Certification Number: ZC10-17015388
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
100 | 1 | Set parameter 101-103 to default value. | 0 (Default) |
Reset the parameter 101-103 | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
101 | 4 | To set which reports need to be sent in Report group 1. | 1 | Send Meter Report of voltage (V) | |
2 | Send Meter Report of current (A) | ||||
4 | Send Meter Report of wattage (W) | ||||
8 | Send Meter Report of energy (kWh) | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
102 | 1 | To set which reports need to be sent in Report group 2. | 1 | Send Meter Report of voltage (V) | |
2 | Send Meter Report of current (A) | ||||
4 | Send Meter Report of wattage (W) | ||||
8 | Send Meter Report of energy (kWh) | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
103 | 1 | To set which reports need to be sent in Report group 3. | 1 | Send Meter Report of voltage (V) | |
2 | Send Meter Report of current (A) | ||||
4 | Send Meter Report of wattage (W) | ||||
8 | Send Meter Report of energy (kWh) | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
110 | 1 | Set parameter 111-113 to default value. | 0 (Default) |
Reset the parameter 111-113 | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
111 | 4 | Set the interval of automatic report for Report group 1. | 1 to 2147483647 (Default) |
The range of interval time is 1 to 2147483647. | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
112 | 4 | Set the interval of automatic report for Report group 2. | 1 to 2147483647 (Default) |
The range of interval time is 1 to 2147483647. | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
113 | 4 | Set the interval of automatic report for Report group 2. | 1 to 2147483647 (Default) |
The range of interval time is 1 to 2147483647. | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
120 | 1 | Configure the external switch mode for S1. | 0 (Default) |
Enter automatic identification mode | |
1 | Momentary push button mode | ||||
2 | 3 way switch mode | ||||
3 | 2-state switch mode | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
121 | 1 | Configure the external switch mode for S2. | 0 (Default) |
Enter automatic identification mode | |
1 | Momentary push button mode | ||||
2 | 3 way switch mode | ||||
3 | 2-state switch mode | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
122 | 1 | Get the state of touch panel port | 0 (Default) |
the touch panel is not connected. | |
5 | the touch panel is connected. | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
123 | 1 | Set the control destination for external switch S1 | 1 | control the output loads of itself. | |
3 (Default) |
control the output loads of itself and other nodes. | ||||
2 | control the other nodes | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
124 | 1 | Set the control destination for external switch S2 | 1 | control the output loads of itself. | |
2 | control the other nodes. | ||||
3 (Default) |
control the output loads of itself and other nodes | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
125 | 1 | Set the default dimming rate. | 1 to 255 (Default) |
The value range is 1 to 255 seconds. | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
128 | 1 | Get the current working mode | 0 (Default) |
Unknown working mode. | |
1 | 2-wire mode | ||||
2 | 3-wire mode | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
129 | 1 | Set the dimming principle | 0 | Trailing edge mode | |
1 (Default) |
Leading edge mode | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
130 | 1 | To get what type of load the Dimmer is connected to. | 1 | Resistive load | |
2 | Capacitive load | ||||
3 | Inductive load | ||||
0 (Default) |
Unknown load. | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
131 | 1 | Set the min brightness level that the load can reach to. | 0 to 99 (Default) |
The level range is 0 to 99. | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
132 | 1 | Set the max brightness level that the load can reach to. Note: | 0 to 99 (Default) |
The level range is 0 to 99. | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
20 | 1 | Configure the output status after re-power on it. | 0 (Default) |
Last status | |
2 | Always off | ||||
1 | Always on | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
249 | 1 | Set the recognition way of load | 0 | Never recognize the load when power on | |
1 | Only recognize once when first power on | ||||
2 (Default) |
Recognize the load once power on | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
252 | 1 | Lock/unlock configuration parameters | 0 (Default) |
Unlock | |
1 | Lock | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
255 | 4 | Reset the Nano Dimmer | 0 (Default) |
Reset all configuration parameters to factory default setting | |
1431655765 | Reset to factory default setting and removed from the z-wave network | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
3 | 1 | Current Overload Protection. | 1 (Default) |
Enable | |
0 | Disable | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
4 | 1 | Overheat protection. | 0 (Default) |
Disable | |
1 | Enable | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
80 | 1 | To set which notification would be sent to the associated devices (Group 1) | 1 | Send Hail CC | |
2 | Send Basic CC report | ||||
3 | Send Multilevel Switch report | ||||
0 (Default) |
Send Nothing | ||||
4 | Send Hail CC when using the manual switch to change the load state. | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
81 | 1 | To set which notification would be sent to the associated nodes in association group 3 | 1 (Default) |
Send Basic Set CC | |
0 | Send Nothing | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
82 | 1 | To set which notification would be sent to the associated nodes in association group 4 | 0 | Send Nothing | |
1 (Default) |
Send Basic Set CC | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
85 | 4 | Set appointment 1 | 16777215 to 16777222 | The day value (Mon to Sun) | |
256 to 316 | The minute value of ON time | ||||
65536 to 65560 | The hour value of ON time | ||||
0 to 99 | The brightness level | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
86 | 4 | Set appointment 2 | 0 to 99 | The brightness level | |
256 to 316 | The minute value of ON time | ||||
65536 to 65560 | The hour value of ON time | ||||
16777215 to 16777222 | The day value (Mon to Sun) | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
90 | 1 | Enables/disables parameter 91 and 92 below: | 0 (Default) |
Disable | |
1 | Enable | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
91 | 2 | Set the threshold value of wattage. | 0 to 60000 (Default) |
The thershold value range is 0 to 60000 | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
92 | 1 | Set the threshold value of wattage. | 0 to 100 (Default) |
The thershold value range is 0 to 100 |
Z-Wave Command Classes
Model: Nano Dimmer (ZW111-C)
Z-Wave Certification Number: ZC10-17015388
Supported Command Classes |
All Switch |
Association Group Information |
Association V2 |
Basic |
Clock |
Configuration |
Device Reset Local |
Firmware Update MD V3 |
Manufacturer Specific V2 |
Meter V3 |
Notification V4 |
Powerlevel |
Scene Activation |
Scene Actuator Configuration |
Security |
Switch Binary |
Switch Multilevel V3 |
Version V2 |
Z-Wave Plus Info V2 |
Controlled Command Classes |
Basic |
Hail |
Z-Wave Plus: | Нет |
---|---|
Z-Wave аппаратная платформа | ZM5101 |
Z-Wave тип библиотеки | Enhanced 232 Slave |
Z-Wave тип устройства | Light Dimmer Switch |
Z-Wave тип роли | Always On Slave |
Технология | Z-Wave+ |
Внутренняя/наружная установка | Внутренняя |
Производитель | Aeotec |
Группы ассоциаций | 4 |
Z-Wave Функции | Запуск сцен, Multilevel |
Поддерживаемые типы выключателей/управления | Кнопочный, Тумблерный, Кулисный, Без подсветки, Сенсорная панель |
Максимальная нагрузка | 1.2A |
Тип диммера и выключателя | insert module |
Источник питания | Кабель AC |
Тип проводной системы | 2-Wire, 3-Wire |
Тип вставного модуля | Dimmer |
Функции вставных модулей | Измерение мощности |
Форм-фактор | Настенный |
Назначение | Управление освещением |
OTA обновление прошивки | Да |