Z-Wave Plus NEO Electronics Сирена
- When the siren alarm triggered, it will make alarm sound and LED light flashat the same time.
- When the other sensor is triggered, the siren alarm can associate with the sensorsthrough the Z-Wave network.
- Siren alarm can be controlled remotely via mobile phoneApp.
- Compatible with any Z-Wave controller.
- 10 sound can be select
Siren alarm is an intelligent device that can be controlled remotely by the radio frequency. Siren alarm send messages via Z-Wave network to the Z-Wave main controller. In the ZWave network communications, Siren alarm can be connected to any Z-Wave main controller, Different countries
or areas, the radio frequencyof the Z-Wave network is different.In the communication between the Siren alarm and Z-Wave main controller, the siren alarm can both send and receive messages. When press the code button of siren alarm, it will send message to the Z-Wave main controller, the Z-Wave main controller can display the on/off status of the siren alarm; when the siren alarm receives messages
from theZ-Wave main controller, the siren alarmwill be triggered. The siren alarm is battery powered, small and easily install. When sirenalarm is working, LED light will flash, and there will be alarm sound at the same time. The sound is not lower than 90 decibels.
The better the wireless range, the more reliable the product, and Motion Sensor offers a class-leading antenna. Optimised for reliability, this tiny sensor can wireless communicate over 150 metres / 492 feet.
The best antenna. The best Z-Wave. Motion Sensor is built upon Z-Wave Plus and Gen5 technology to offer you the fastest response times and optimal battery life between recharges.
If you’re using a sensor for security you want its communication to be secure. That’s why Motion Sensor utilises AES-128 wireless data encryption to keep it secure from prying eyes and hackers.
Whether used for home intelligence or security, you want your sensor to always stay up to date. Whenever firmware udpdates are made for it, you’ll be able to upgrade Motion Sensor via Microsoft Windows or select Z-Wave gateways.
Technical Specification
- MODEL NUMBER
- NAS-AB01Z
- HARDWARE
- Z-Wave Chip 500 series
- COMMUNICATION PROTOCOLS
- Z-Wave Plus
- Z-WAVE GROUPS
-
- Three groups and five devices (nodes)
- DIMENSIONS
- 70x68x31mm (LxWxH)
- CERTIFICATIONS
- FCC, DEKRA, Z-Wave
- POWER SUPPLY
- CR123A*2
- MAX ALARM POWER
- 2.5W
- MAX VOLUME
- 80-100 dB
- POWER CONSUMPTION
- up to 1W
- RADIO SIGNAL POWER
- up to 1mW
- RANGE
- up to 300m (outdoors) and 150m (indoors)
- OPERATIONAL TEMPERATURE
- 0-40°C
- STORAGE TEMPERATURE
- -20-60°C
- OPERATIONAL HUMIDITY
-
- 80%
- SUPPORTED AUDIO FORMATS
- No
Package content
- Unit
- Siren alarm
- Battery (x2)
- Screw (x3).
- Screw stopper (x3)
- Double-side adhesive
- User manual
Additional Info
Технология | Z-Wave+ |
---|---|
Z-Wave Plus: | Нет |
Z-Wave аппаратная платформа | ZM5202 |
Z-Wave тип библиотеки | Routing slave |
Z-Wave тип устройства | Siren |
Z-Wave тип роли | Always On Slave |
Производитель | NEO Electronics |
Внутренняя/наружная установка | Внутренняя |
Группы ассоциаций | 3 |
Z-Wave Функции | Power Level |
Источник питания | Батарея |
Тип батареи | CR 123 |
Форм-фактор | Настенный |
Назначение | Закрытие и отслеживание состояния двери |
OTA обновление прошивки | Нет |
Обновление музыки | Нет |