Dallas Semiconductor Temperature Sensor DS18B20 Tube
- Unique 1-Wire® Interface Requires Only One Port Pin for Communication
- Reduce Component Count with Integrated Temperature Sensor and EEPROM
- Measures Temperatures from -55°C to +125°C (-67°F to +257°F)
- ±0.5°C Accuracy from -10°C to +85°C
- Programmable Resolution from 9 Bits to 12 Bits
- No External Components Required
- Parasitic Power Mode Requires Only 2 Pins for Operation (DQ and GND)
- Simplifies Distributed Temperature-Sensing Applications with Multidrop Capability
- Each Device Has a Unique 64-Bit Serial Code Stored in On-Board ROM
- Flexible User-Definable Nonvolatile (NV) Alarm Settings with Alarm Search Command Identifies Devices with Temperatures Outside Programmed Limits
- Available in 8-Pin SO (150 mils), 8-Pin µSOP, and 3-Pin TO-92 Packages
Programmable Resolution 1-Wire Digital Thermometer
Датчик DS-001 представляет собой цифровой термометр с программируемым разрешением от 9 до 12 бит. Он подходит для измерения температуры в домах или офисах.Точность составляет ± 2 ° C в диапазоне от -55 ° C до 125 ° C.Датчик очень мал и поэтому может быть размещен в любом месте. Кроме того, каждый датчик адресуетсяс 64-битным кодом. По этой причине несколько датчиков может быть подключено к одной 1-Wire шине. Питание от 3 В до 5,5 В подается напрямую через линию передачи данных.
В комплект входит 1 датчик.
The DS18B20 digital thermometer provides 9-bit to 12-bit Celsius temperature measurements and has an alarm function with nonvolatile user-programmable upper and lower trigger points. The DS18B20 communicates over a 1-Wire bus that by definition requires only one data line (and ground) for communication with a central microprocessor. In addition, the DS18B20 can derive power directly from the data line ("parasite power"), eliminating the need for an external power supply.
Each DS18B20 has a unique 64-bit serial code, which allows multiple DS18B20s to function on the same 1-Wire bus. Thus, it is simple to use one microprocessor to control many DS18B20s distributed over a large area. Applications that can benefit from this feature include HVAC environmental controls, temperature monitoring systems inside buildings, equipment, or machinery, and process monitoring and control systems.
Applications/Uses
- Consumer Products
- Industrial Systems
- Thermally Sensitive Systems
- Thermometers
- Thermostatic Controls
Technical Specification
- HARDWARE
- COMMUNICATION PROTOCOLS
- 1-Wire
- ACCURACY
- ±0.5°C from -10°C to +85°C
- DIMENSIONS
- Base size: 5 x 5 x 3 cm (LxWxH)
- CERTIFICATIONS
- CE,
- POWER SUPPLY
- -0.5V - +6.0V
- POWER CONSUMPTION
- up to 1W
- OPERATIONAL TEMPERATURE
- -55°C to +125°C
- RELATIVE HUMIDITY:
- 8% - 80%.
- IP CODE
- IP67
Package content
- Unit
- User manual
Additional Info
Технология | 1-Wire |
---|---|
Производитель | Dallas Semiconductor |
Тип датчика | температуры |
Длина | 12 |
Внутренняя/наружная установка | Внутренняя |
Источник питания | Блок питания DC |
Форм-фактор | Другой |
Назначение | Отслеживание температуры, влажности, освещенности |